Array not working and LCD screen is

on, "A" amperage reading is

above 2.6.   Unit has shut down.

Warning beep will proceed shut down.

Too much salt.

Empty container, either replace bag

or or wash thoroughly.   Start with a

small amount of salt, add salt and

work amperage up until in the

desired range of 1.9 to 2.2.  

Be sure to use sea salt.

 Array was working, LCD screen is on.

"A" amperage was in proper range and

now has exceeded limit and shut down.

 In some instances the body may

release some salt and the amperage

will rise and exceed the limit.

Try adding some water to the bath

to dilute the salt content.

Restart unit

Array not working

and LCD screen is on

Check above, if not remedied then

replace array.   An array will last

approximately 30 sessions.   NOTE, the

higher the amperage during sessions

the shorter the life span of the array.